Selected:

1791284 Powermatic TS29 Shaper, 7.5HP 3PH 230/460V

$9,799.99

1791284 Powermatic TS29 Shaper, 7.5HP 3PH 230/460V

$9,799.99

Powermatic 1791284 TS29 Shaper, 7.5HP 3PH 230/460V

The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra-large quill assembly with a full seven-inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, onboard the table is a large miter head complete with stock hold-down clamp and a 56″ miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.

Categories: ,

Description

Powermatic 1791284 TS29 Shaper, 7.5HP 3PH 230/460V

The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra-large quill assembly with a full seven-inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, onboard the table is a large miter head complete with stock hold-down clamp and a 56″ miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.

Features:
  • Sliding table travels a full 49-1/4 inches
  • A fully adjustable fence has dual digital readout positioning with micrometer adjustments
  • Tilting spindle for additional angles
  • Large table with built-in slider with room for a stock feeder
  • Full coverage guard with workpiece hold downs
  • Five spindle speeds in forward and reverse with lighted indicator
  • Large diameter multiple table inserts accommodate virtually any size cutter
  • Includes 3/4″, 1″ and 1-1/4″ spindles

Specifications:

  • Style (Type) Shaper
  • Spindle Speed (RPM) 3,000, 4,000, 6,000, 8,000, 10,000
  • Maximum Spindle Diameter (In.) 1-1/4
  • Spindles Included 3/4, 1, 1-1/4
  • Spindle Size Under Nut (In.) 3/4″ Spindle (3-1/2), 1″ Spindle (6-1/4), 1-1/4″ Spindle (6-1/4)
  • Spindle Travel (In.) 7
  • Spindle Tilt (Deg.) 45 Forward, 5 Back
  • Reversible Yes
  • Maximum Diameter Cutter Above Table (In.) 12
  • Maximum Diameter Cutter Below Table (In.) 9
  • Table Inserts (In.) 2-1/5, 5-1/2, Oval (Tilting)
  • Table Size (In.) 51-1/2 x 33-1/2
  • Table Travel (In.) 49-1/4
  • Table Height from Floor (In.) 49-1/4
  • Sliding Table Size (In.) 11-1/4 x 51-1/4
  • Fence Size (L x H) (In.) 46 x 5
  • Fence Travel (Major and Minor) (In.) 5-3/8, 3-5/8
  • Dust Port Outside Diameter (In.) Two @ 5″
  • Dust Collection Minimum CFM Required (CFM) 800
  • Digital Readouts Spindle Height
  • Electrical Controls 24 volt
  • Motor Power (HP) 7-1/2
  • Motor Phase 3
  • Motor Voltage (V.) 230/460
  • Prewired Voltage (V.) 230
  • Wiring Remarks Requires 460V Magnetic Switch
  • Motor Current (Amps) 30/15
  • Recommended Circuit Size (Amps.) 40

Reviews

There are no reviews yet.

Be the first to review “1791284 Powermatic TS29 Shaper, 7.5HP 3PH 230/460V”

Your email address will not be published. Required fields are marked *

Close Menu
×
×

Cart